Add Washing Machine/Tumble dryer Combo Unit with long doors.
Add Bottom Microwave Unit with drawer.
Add Single Diagonal wine rack.
Add Double Diagonal wine rack.
Add Sonae Castle Grey and Shadow Blue colors to views.
Add ability to select Gelmar undermount runners.
Fixed issue with Top Corner unit side depth.
Add Framed and Non-Framed mirrors.
Add ability to change handles in 3D. (Arch, Bar, Square D, Galando Knobs, Enzo and Zion)
Fixed issue with rotation of Units and Tops in Floor Plan Designer.
Add ability to add notes on floor plan and front views.
Fixed issue with updating of Odds and Ends, Profit and Labour insets.
Fixed issue with displaying plinth and filler color when selecting to view front view in white only.
Fixed issue with fixing rail width on certain units.
Fixed issue with copying of plans.
Fixed issue with deleting of plans.
Fixed issue with updating of cut list component material when selecting new boards and edging.
Fixed issue with adding of new plans from Floor plan Designer.
Fixed issue with combining of same sized components when exporting cutting list to Excel.
Fixed issue where both top fillers and light shields are deleted when deleting either of them.
Add ability to add additional plans.
Add ability to delete unwanted plans.
Lots of “behind the scenes” improvements.
Add ability to export hardware list to Excel.
Fixed issue with Broom Combo unit bottom shelve quantity.
Fixed issue with loading of Plinth and Filler Color.
Add new Microsoft Office independent Excel exporting system. (Microsoft Office not needed)
Add ability to export cutting list to Excel in MacOS.
Add ability to create PDF invoices in MacOS.
Fixed issue with Groove editor.
Add ability to specify broom height in broom cupboards.
Add Broom Combination Unit.
Add Microwave unit with book shelf at bottom of unit.
Fixed issue with drawer bottoms when Grass Dynapro runners are used.
Add ability to change Plinth color on 2D and 3D views
Add ability to change Top Filler color on 2D and 3D views.
Add ability to change handle color on 3D views.
Changed cut list export file name to include Quote Number, Customer, Company and Job name.
Fixed issue with door sizes if 1.5mm edging is used.
New PDF creation and viewer system independent from Adobe Reader.
Fixed issue with missing sides on bedroom budget unit when Split Bedroom setting is enabled.
Fixed issue where all bedroom vanity unit components were added to grained boards.
Add ability to select floor tiles and changing grout color and width.
Add more than 300 floor tile and laminate colors.
Add ability to select undermount runners on dustbin and spice units.
Fixed issue with saving of print settings when printing floor plans.
Changed drawer width on bedroom 3 door sliding door units to allow space for opening of drawers.
Fixed issue with saving and reading of View settings in Floor plan designer.
Removed additional Blind Corner panel on Bottom Blind Corner Units
Add ability to quickly switch between main and secondary databases if needed.
Add Bar chair to furniture.
Add ability to select table/chair color.
Add ability to select window frame color.
Add ability to set door offset for tall units.
Fixed issue with handles on Bedroom 90 deg Corner unit doors in 3D with split doors.
Add new windows and sliding doors to views.
Fixed issue with edging color on bottom spice unit interior parts.
Fixed issue with edging when exporting cutting list to Excel.
Fixed issue with top shelves on Corner units with drawers.
Fixed issue with scaling of 3D views under certain conditions.
Fixed “Invalid Typecast” error in 3D views.
Add Farmhouse door profile to 3D views
Add Butler (Lab) Sink.
Improved freestanding stove, top loader washing machine and chest freezer 3D views.
Fixed issue with loading of boards in optimizer.
Fixed issue with adding of custom doors to cutting list when solid doors are selected.
Fixed issue with adding of payments made or received under Bookkeeping.
Add ability to set floating shelve angle (for use as shoe rack in bedroom units)
Fixed issue with saving of Invoice Numbers.
Fixed issue with drawer sizes on Tall units with drawers behind doors using Dynapro runners
Add Bottom sliding door unit with horizontal slider.
Add 5 new drawer combination units.
Fixed issue with drawer bottom quantities on bedroom sliding door units.
Fixed issue with bottom shelf depth on Top Open Shelve and Top Wine Unit.
Add ability to select up to 5 different color units on floor plan and 3D views.
Fixed issue with white interior edging on certain units.
Fixed issue with exporting of cutting lists under certain conditions.
Add ability to choose between PDF or HTML invoices and quotations.
Fixed issue with alignment of labels when printing cutting list to labels.
Add Light-Shield to 3D views.
Add ability to change wall corner unit left and right depths.
Fixed issue where bedroom sliding doors swing open when selecting to open all doors in 3D.
Fixed issue with print font sizes on MacOS.
Add settings to remove Spice- and Dustbin Unit interiors from cutting list.
Fixed issue with door sizes on Bedroom 2Dr Combo Unit with Drawers.
Fixed issue with assigning edge color when selecting White Edging on interiors.
Fixed issue with dustbin drawer floor length.
Fixed issue with slow exporting to excel files.
Add exporting of excel files (without the need of a template) by creating it at runtime.
Fixed issue with door width on Bedroom Budget Single Drawer 2 Door Unit.
Fixed issue with door width on Bedroom Budget Double Shelve Unit with Drawers.
Fixed issue with missing divider on Bedroom 2 Door Combo Unit with Drawers.
Fixed issue with missing divider on Bedroom Budget 2 Door Combo Unit with Drawers.
Fixed issue with shelve depth on Bottom Open Shelve Unit.
Fixed issue with displaying of customer info on quotations of newly created customers.
Completely new quotation saved in PDF format.
Add ability to send quotations directly to customers without using external email software.
Add ability to change door profiles directly from 3D views.
Fixed issue with Blind Corner Panel width on Bottom- and Bedroom Blind Corner units.
Add ability to move a job from one customer to another.
Add Kronospan range of board and top colors (157 Board and 58 Top colors).
Add 14 new board and 14 new top colors from PB Bison.
Changed Blind corner panel length to unit height minus plinth height.
Split Blind corner panel width in 60mm color panel and the remainder to interior material.
Construction changes were made to the following units:
Spice unit with shelves.
Add split shelves to wall corner unit if selected to split shelves.
Cupboard Manager now available for Mac OS Catalina 64-bit and Window 32- and 64-bit.
Fixed issue with unit Top Level on certain bedroom units.
Fixed issue where dimensions for appliances are displayed at top of 2D front views.
Add ability to specify room door bottom distance from floor in floor plan.
Fixed issue with Bedroom Walk-through cupboard door length.
Fixed issue where unit sides are grooved on a Top Open Shelve Unit with solid backing.
Add 15 new units.
Bottom unit with roll-up door.
Top unit with roll-up door.
Top single door unit with roll-up door at bottom.
Top two door unit with roll-up door at bottom.
Bedroom 90° corner unit.
Tall unit with washing machine and tumble dryer behind doors.
Tall oven unit with oven at bottom and microwave above with top doors.
Bottom Drawer Unit with up to 6 different front sizes.
Under Counter Oven 45° Unit.
Eye Level Oven 45° Unit.
Eye Level/MW Oven 45° Unit.
Tall single door unit with concealed drawers.
Tall 2 door unit with concealed drawers.
Bedroom 2Dr Combo Unit with Drawers.
Bedroom Budget 2Dr Combo with Drawers.
Switching over from Firebird 2.5 to Firebird 3.0.
Add ability to automatically deduct 10mm from shelve depth on units with glass doors.
Fixed issue with side filler cross-grain rotation in cutting list.
Add border to walls for easier identification of walls in 3D view.
Add ability to print visible components in shaded gray when printing unit assembly lists.
Add password protection to restoration of database to protect data.
Add creation of Database restoration file for accidental restoring of database.
Add ability to change Distribution Board dimensions in floorplan.
Fixed issue with saving of Drawer type and Finger grip handle to configuration.
Fixed issue with hanger rail length of Bedroom 4 Door Unit 2 in 3D.
Add 13 new budget bedroom units.
Improved suggested material quantities on certain units.
Fixed issue with displaying of single door bedroom unit hanger rail on 3D views.
Fixed corner unit door by deducting another 2mm from door width.
Add Finger grip handles to new 3D views.
Add setting to remember Finger-grip selection.
Removed auto calculation of top unit height when changing unit top level.
Fixed issue with Box Leg not allowing Depth dimension when adding new Boxed Leg.
Fixed issue with export of cutting list to excel under certain conditions.
Added 101 new Niemann Board Colors.
Fixed issue with door width on Wall Corner 45 Degree unit under certain conditions.
Fixed issue with worktop area (m²) when changing existing top dimensions.
Fixed issue with top colors when exporting and importing plan to and from XML.
Fixed back panel size on Fridge units with 3 doors.
Fixed issue with adding of Curve-Line Double Bowl to projects.
Fixed issue with drawer front width on normal drawer unit when cross grain is selected.
Add ability to change program screen colors.
Add company logo to main screen.
Add ability to specify gap between worktop and wall units.
Add ability to change default wall unit height per plan.
Fixed issue with spice unit front color in 3D when alternate door color is selected.
Fixed issue with shelve dimensions on open shelve units.
Prepare database for custom units in next major upgrade.
Fixed issue with plinths in cutting list if unit plinth heights is zero.
Fixed issue with drawer front width on normal drawer unit if top front height differs from rest.
Add auto delete of older jobs.
Fixed issue with hinge and handle quantities on Blind Corner units.
Add ability to select output folders for screenshots and exports.
Fixed issue with Corner 45 Degree unit shelve sizes.
Add ability to select cutting list for FP, Fillers, Plinths and side fillers.
Fixed issue with Eyelevel oven with drawers adding unnecessary shelves to cutting list.
Fixed “Argument out or range” error when generating 2D views.
Fixed issue with door width on Bedroom Single Door Shelve Unit.
Fixed Blind Corner door on 2D and 3D views if door width bigger than 600 (Split doors)
Fixed Blind Corner Panel in 3D View if profile doors are used.
Changed all Single door unit door width to be 3mm smaller than unit width instead of 4mm.
Add setting to use adjustable shelves to make shelve width 1mm smaller.
Fixed partial printing of cupboard layouts when windows scaling is bigger than 100%.
Add setting to disable recessed backing on corner units.
Add setting to allow white edging on all cupboard interior components.
Fixed issue with changing of Wall colors in 3D view.
Fixed calculation of edging quantity for components with crosscuts under certain conditions.
Add 5 new PG Bison colors.
Fixed issue with displaying of weird colors in 3D Views on certain computers.
Add ability to print cutting list labels to continuous labels.
Add scrolling by keys when zoomed-in in floor plan designer.
Add shelve recess to corner unit shelves.
Change corner units fixing rail quantity from 2 to 4.
Add ability to specify shelve width on Bedroom 2 Door Combo Unit.
Fixed floor shelf dimensions on Bottom Open Shelf- and Tall Shelf Unit when using grooved backing.
Add Tudor, Colonial, Classic and Cottage door profiles to 3D views.
Add Lattice doors to 3D views.
Add ability to select board optimization method for “Cutting speed” or “Better optimization”.
Fixed issue with updating of gloss colors on unit visible sides when changing setting in 3D view.
Fixed issue where no panel is displayed in 3D on Under-counter oven unit with no drawer.
Add ability to search for Customer OR Company name.
Add ability to search Job Name OR Quote Number for all customers
Change pantry unit shelve depth to 350mm with auto calculate if unit depth is too small to fit a 350 shelve.
Fixed issue with hiding of handles in 3D view.
Add Square and Modern Pattern doors to 3D views.
Add ability to set the maximum filler height.
Fixed issue with calculating of door square meters.
Fixed missing Distance from floor input when adding light switches under certain conditions.
Add shortcuts to 3D viewer.
Fixed issue with edging on some components.
Fixed issue displaying of floating shelve in 3D viewer.
Improved cupboard contrast between shelves, sides and backing in 3D views.
Improved top fillers in 3D views.
Fixed issue with 3D views displaying funny colors on some computers.
Add startup splash screen.
Fixed some minor issues.
Add Full-Screen button to floorplan to maximize working area.
Fixed issue where top fillers are added to cutting list if unit top level more than 250mm from ceiling.
Fixed drawer front and back side height when using undermount runners.
Fixed issue with transfer of Plinths and fillers to other cutting lists.
Add ability to detect plinth and filler cutting list to place them in correct cutting list.
Fixed issue where face panel edging is the same as carcass edging instead of door edging.
Improved Board Optimization.
Fixed issue with loading of worktop images when selecting plain top colors.
Fixed issue with Back Panel edging color in cutting list.
Fixed issue with unit side color on units with face panels.
Fixed issue with loading of door images when selecting plain door colors.
Fixed issue with cutting list on units using alternate door color.
Improved cupboard inner detail on 3D views to be more realistic.
Improved 3D rendering and rotation speed.
Add 12 new Sonae Novolam colors.
Fixed issue with deleting of plugs and light switches.
Add ability to manually set Currency.
Fixed error where Alternate Door quantity is automatically copied from Alternate Doors in old jobs.
Automatically update board price to latest available price if price = 0.00 in cost manager.
Fixed backing size on bottom corner unit with split-shelves.
Fixed some bugs causing “Access Violation” Errors.
Fixed some bugs causing “Argument out of range” Errors.
Fixed some bugs causing “Invalid Pointer Operation” Errors.
Fixed error when deleting all walls from floorplan if plugs were added to a plan.
Add ability to change gloss intensity.
Fixed some Access violation errors on Floorplan (Hopefully).
Fixed issue with shelve quantity on Bedroom Unit with Drawers and Split Shelves
Fixed error when importing plan from XML file created with a comma as decimal symbol.
Add light Switches, Plugs and DB Boxes.
Fixed error when selecting boards under certain conditions.
Add ability to change door colors to gloss in 2D and 3D views.
Add option to select alternate top color.
Fixed Error when reloading prices from Setup Files on older jobs.
Automatic select and bring unit to front when selecting a unit from the Unit List on the Floorplan.
Add ability to double click on a unit in the Unit List on the Floorplan to edit unit.
Fixed issue where unwanted components are being added to cutting list when adding furniture.
Add Alternate Carcass edging to be used when Alternate Color is selected on a unit;
Add Alternate Solid Doors to be used when Alternate Color and Solid doors is selected.
Add additional cutting list for Alternate Solid Doors.
Add ability to select Cross Grain on all units or on a specific unit only.
Fixed issue with fridge unit backing size when grooved backing is selected.
Add face panel above fridge in Fridge and Fridge 3 Door Units.
Fixed issue with door handle position on Bedroom Drawer Combination Units.
Fixed error when changing to finger grip handles if a wicker basket unit is used in a project.
Add confirmation to change all wall colors if some wall colors differ from the default plan colors.
Add ability to select wall color in the wall property screen.
Fixed issue with changing of wall color.
Fixed memory leak causing TCanvasD2D errors when frequently entering 3D Viewer.
Fixed issue with loading of fridge double door image in 2D and 3D views.
Add checking of file size and request new download if needed during upgrade process.
Fixed issue with wall colors.
Fixed issue with 2D view of Tall Corner unit.
Fixed issue with Top Blind-corner unit door width
Fixed issue with saving of unit top level when adding a new unit.
Add Job Name to quotations and invoices.
Add ability to change individual wall color.
Fixed issue with drawer cross-cuts on Eye-Level oven units.
Add automation of major upgrades to simplify update process.
Add 10 new PG Bison colors.
Fixed issue with deleting of walls.
Add flat screen TV to appliances.
Add live editing and quick resizing of walls by dragging wall start and end corners.
Fixed issue with hanger rail on certain bedroom units in 3D views.
Change Options and Door Profile Buttons in floorplan to indicate selected settings.
Add setting to specify sliding door offset to allow for different sliding mechanisms
Fixed issue with shelve quantity on 3 Door Bedroom Sliding Door Units with drawers.
Fixed issue with quotation number not displaying.
Fixed Issue with adding of back panel twice to cutting list under certain conditions.
Add ability to print Proforma invoice.
Fixed issue with Fridge Unit shelves on 3D views.
Fixed issue with displaying of Corner Unit size labels on Floor Plan.
Fixed issue with Dustbin Unit bottom width.
Fixed issue on quote preparation form when a negative amount (Credit) is entered.
Fixed issue with Back Panel edging to match door edging.
Fixed issue with displaying of door pattern on corner unit doors in 2D views.
Fixed issue with Grocery cupboard door position in 3D views.
Fixed door quantity on 3 Door Bedroom Sliding Door Units.
Fixed issue with drawer front width on bedroom units with single drawers.
Add ability to hide unit dimensions on floor plan and 2D views.
Add see-through windows and doors to 3D views.
Add see-through cupboard doors with glass frames on to 3D views.
Add Shaker doors to 3D views.
Add ability to make walls transparent.
Add remarks to cutting list to indicate door swing direction.
Add ability to print job expenses.
Add export of costing to Symbility Excel file.
Add 5 new bedroom units with sliding doors.
Fixed issue with Bottom Blind Corner top shelve color in 3D Views.
Fixed more issues in 3D Views.
Fixed issue with saving of drawer type on certain units.
Add ability to hide all handles on doors.
Add ability to change handles to finger grip handles.
Fixed issue with drawer front width on bedroom units if offset hinges are used.
Fixed issue with unit divider position in 3D Views.
Fixed issue with certain units in 3D Views.
Fixed issue with Top Wine and Top Open Shelve unit top shelve width.
Improved board optimization view quality.
Fixed issue with clearing of unit list when printing quotations with unit list.
Fixed Flip-up unit door opening direction when clicking on door in 3D viewer.
Add ability to include job summary with material list when printing quotations.
Add ability to hide walls in 3D viewer.
Fixed issue with drawer bottoms and backing on 45° Corner Drawer unit.
Fixed issue with Tall MW units where microwave backing are not added to grain boards
Fixed issue with drawer hardboard quantity on Microwave Drawer Combination unit
Fixed issue with drawer hardboard quantity on Eyelevel Oven with Drawers.
Add solid melamine backing to all Microwave units.
Fixed issue with disabling of autorotation on grained boards under certain conditions.
Fixed issue with updating of suggested board quantities in costing manager.
Add ability to export cutting list to CNC excel file.
Add ability to display light-shields in 2D and 3D views.
Add 24 new Sternwood melamine colors.
Add 3 new PG-Bison colors. (Cannero, Normandy and Maidenwood)
Add more optimize options. (Match Length, Match Width and Match Area)
Add ability to display shelving breaks on optimized board layout. (1/3 of board width)
Add cutouts, miters, grooves and crosscuts in export of cutting list to Excel.
Fixed issue with saving of cut list mode when adding or editing units in floor plan.
Fixed saving of worktop vertical alignment when editing top.
Fixed unit snapping to certain walls.
Add ability to show cornice on top of wall units instead of filling in 2D and 3D views.
Fixed issue with chimney in 3D viewer.
Fixed memory leak in floorplan.
Fixed some minor bugs.
Fixed issue with blind corner panel with.
Fixed Issue with activation of Crosscut Button under certain conditions.
Re-arrange bitmap locations for future image upgrades directly out of program.
Fixed issue with Top 3, 4, 5 and 6 Door unit backing oversize under certain conditions.
Add ability to select solid top shelve instead of cleats on kitchen bottom units.
Add color background to identify grained components and hardboard in Unit Cutting List.
Add Glass Shelve or Glass Table Top.
Add furniture – Dining Room Tables and Chairs.
Add Bulkhead Unit.
Add 68 new Seno melamine colors.
Fixed issue with printing of plans on Landscape after printing on Portrait.
Add automatic calculation of wall unit height for units standing on worktops.
Add different hobs. (Electric, Induction or Gas) (300, 600, 750 or 900mm)
Add inset waste bin lid.
Add wine coolers (300, 500 or 750mm) and Bar Fridge.
Fixed issue with calculating combined unit plinth lengths.
Add ability to rotate kitchen tops to be used as side panels.
Add ability to choose what to add to cutting list (Carcass only, Doors only, etc).
Add ability to print unit list with quotation.
Add Boxed table leg.
Fixed issue with date format in yearly job summery.
Fixed issue with currency value when selecting material in cost manager.
Fixed issue with scaling of sinks in floor plan.
Add ability to print kitchen counter layout to be sent to supplier.
Add post form top area to quantities when doing quotations.
Fixed issue with Top Wine Rack top shelve under certain conditions.
Fixed issue with update of price from costing in the quotation screen.
Add ability to use solid melamine backing on all kitchen units.
Fixed issue with showing multiple 3D units in unit preview on main screen.
Create a new message system to prevent responsive errors.
Fixed issue with currency when creating invoices and invoice amount is zero.
Fixed issue with numbers and currencies under certain conditions.
Fixed issue with floorplan after opening several jobs consecutive.
Add printing of Statement and Summary
Fixed issue with top door width on Bedroom Blind-Corner unit.
Fixed issue with changing of wall color.
Add Bookkeeping functionality.
Fixed issue with top door width on Bedroom Blind-Corner unit.
Fixed issue with changing of invoice background color.
Add Bookkeeping functionality.
Fixed issue with wall colors in 3D Views.
Add real-time 3D preview of current selected unit.
Fixed “Invalid Integer Value” error when entering Material Setup.
Add 2 new Corner Drawer units.
Add Microwave box unit.
Add new bedroom unit with drawers and split shelves.
Rename database to try and protect database from Ransomware Viruses.
Add 121 new top colors.
Add ability to search top and melamine colors by name.
Fixed Issue with viewing of walls in 3D Views.
Fixed issue with automatic upgrade of software on certain computers.
Add ability to email cutting list directly after exporting to excel.
Fixed issue with displaying of vertical labels on 2D front views.
Add vertical label to display gap between top and bottom units on 2D views.
Add Shaker doors to 2D Door Profiles.
Fixed “Out of Range” error when deleting tops after duplicating plan.
Add setting to combine same sizes components on Face- and Excel sheets.
Fixed issue with saving and loading of secondary company Vat Registration.
Fixed some minor issues.
Add 4 new Egger board colors.
Add 5 new Sonae board colors.
Various behind the scene changes to improve program stability and speed.
Fixed issue with Top 45° Corner Unit shelve sizes.
Fixed issue with program freezing during updates under certain conditions.
Fixed issue with drawer side depths on top drawer of Bottom Drawer Unit.
Fixed issue with Bottom Display Unit bottom shelve size under certain conditions.
Fixed issue with Bottom Display Unit if shelve quantity = 0
Fixed side depth on bedroom corner unit if split in separate bottom and top unit.
Fixed issue with Bottom Corner Unit bottom shelve size under certain conditions.
Fixed issue with Bottom Open Shelve Unit if shelve quantity = 0
Add setting to hide unit and wall dimension popup on floorplan.
Add button to toggle between long and split bedroom doors in floor plan.
Add button to toggle between under counter oven with drawers in floor plan.
Add button to toggle between full or strip frames doors in floor plan.
Fixed issue with wall unit cleats when solid backing is selected.
Fixed issue with changing of button state in configuration.
Fixed issue with saving of Top Unit face panel length.
Fixed issue with unit side and floor length when using adjustable legs.
Fixed issue with clearing of hardware list in Cost Manager.
Fixed issue with saving of Edge mode in Configuration.
Fixed issue with saving of quotation markup information.
Add icons to configuration screen for easy identification of settings.
Fixed issue with Bottom and Bedroom unit floor length.
Fixed issue with spice unit door width.
Fixed issue with “Wall open shelve unit” component numbers.
Fixed issue with exporting of unit settings when exporting plan to XML.
Fixed Issue with editing of units after duplicating plans.
Fixed issue with printing of item label numbers for small components in optimizer.
Fixed issue with printing of board layout colors if selected to print black only.
Add ability to groove backing on drawers with hardboard.
Re-design configuration page for easier use.
Fixed issue with flip-up unit shelve depth when shelve recess bigger than 0.
Add ability to enter 2 companies for invoicing.
Add displaying and printing of unit list in floor plan.
Add ability to customize material price when adding material to quotation.
Add door profiles to 2D views.
Add new bedroom double shelve unit.
Add ability to delete selected wall.
Add ability to reposition walls with arrow keys.
Fixed Issue with copy of plans.
Fixed issue with editing and deleting of selected doors and windows.
Improved printing and capturing of plans and 3D views.
Increase text size when printing cut list face sheet.
Fixed issue with clearing of data in cost manager when changing tabs.
Add ability to move walls with arrow keys.
Add ability to select which side of wall to generate front view for.
Add ability to move measure start and end positions.
Fixed issue with program execution error when checking for updates.
Fixed issue with Bedroom Walkthrough shelve quantity.
Fixed Issue with program loosing registration before code expire.
Add 2 new board colors to views (Esperenza Oak and Lanza Oak).
Add ability to download additional color images when upgrading.
Fixed issue with top shelve of Grocery Cupboard.
Fixed issue with component out of range error in optimization.
Fixed issue with displaying of unwanted rectangles on rotated text in Optimizer.
Fixed issue with import of plan with no tops, walls and windows from XML.
Add Left or Right cutout selection to display units.
Fixed Issue with displaying of sinks in Sink Selector.
Fixed issue with changing of hinge hole quantities in cutting list.
Fixed issue with selecting of items in cutting list under certain conditions.
Add setting to allow units to be moved outside of plan.
Fixed issue with saving of customer language.
Fixed issue with printing of date and quote numbers on quotations.
Change Export and Import of units to include complete floor plan.
Fixed issue with printing of unit layouts when sinks are added to project.
Fixed issue with transfer of entire cutting list.
Fixed issue with deleting of material from project.
Fixed issue with hinge quantities on new units including Flip-up door units.
Fixed issue with saving of data when printing quotes.
Fixed issue with editing of board quantities in Cost Manager.
Rewrite program to fix VCL and Firemonkey framework compatibility issues.
Add ability to draw floorplan in any shape.
Add ability to draw walls, units and tops at any angle.
Add ability to change individual wall heights.
Add ability to measure accurately on floor plans.
Add ability to zoom on floor plans.
Add ability to make worktops transparent.
Add ability to show or hide 100x100mm grid to floor plan.
Add shortcut keys to floor plan.
Add new units to program.
Add better scaling of plans to be compatible with different screen resolutions.
Add ability to change worktop shapes and corner styles.
Add ability to display and print front views in plain white or in melamine colors.
Add unit width markers to 2D front views.
Add automatic hiding of units with back to camera in 3D Views.
Change excel file for exporting of cut list to be print friendly.
Fixed issue with Vanity unit door height.
Fixed issue with drawer bottoms if unit smaller than 600 with 2 drawers.
Fixed issue with 4 door wall unit backing.
Fixed issue with top door width on Bedroom Single Drawer Unit.
Implement many small changes and bug fixes.
Change Excel to allow up to 1000 cut list items.
Fixed Issue with Fridge Wine combo back panel color on 3D Views.
Add new melamine colors to views.
Add 62 new counter-top colors.
Fixed issue with displaying of sides on freestanding fridges.
Add component over-size protection in optimizer.
Fixed issue with flashing screens on certain computers.
Improved speed of loading material to Board Selector.
Fixed issue with unit name when cloning unit in floorplan designer.
Fixed issue with selecting of short kitchen face panel mode.
Fixed issue with selecting of edge mode in cut list settings.
Fixed issue with selecting between printing cut layout on plain paper or labels.
Fixed issue with displaying of popup menu in cutting list if no units in project.
Fixed issue with showing board quantities in the cost manager.
Fixed issue with adding of data to empty cutting lists.
Fixed issue with closing of program after loading of Cutout, Grooves, etc.
Fixed issue with solid drawer front quantity on Eye-level oven.
Fixed issue with shelve quantity on Pantry units.
Fixed issue with Floating Shelve edging.
Fixed issue with displaying of Quotation heading on invoices
Fixed issue with cutouts if Display unit are to narrow.
Fixed issue with bedroom unit side heights on split units.
Add ability to change default unit names.
Add ability to change individual unit names.
Add setting to allow open tops on bedroom units.
Add additional settings to bedroom units.
Add setting for default ceiling height and unit top levels.
Add ability to export and import units to and from XML.
Add ability to add components to unit cut list in main screen.
Add ability to delete components from unit cut list in main screen.
Add viewing of runner positions to all bottom drawer units.
Increased number of quotation terms and conditions from 5 to 15 lines.
Add ability to change quotation color.
Add 9 new door colors :
Dark Malinga Oak, Highland Antracite Oak, Natural Urbano,
Old Cottage Oak, White Nordic Wood, Coimbra Linear,
Ebony Linear, Folkstone Grey Linear, Storm Grey Linear.
Add setting to ignore lights in 3D view.
Add option to choose what to backup Database or configuration files.
Fixed issue with flip-up doors on Top Flip-up door units.
Fixed issue with bottom door width on Microwave 2 Door Combo unit.
Fixed issue with Corner unit not displaying after changing dimensions.
Fixed issue with displaying of wrong cut list after deleting data in cut list.
Add Caesarstone tops.
Fixed issue with carcass board price after selecting boards.
Fixed issue with drawer bottoms on bedroom 2 drawer combo units.
Fixed issue with bottom corner unit right side when changing right depth.
Vastly Improved 3D rendering speed.
Add automatic deleting of views when deleting a project.
Change Broom unit to split doors automatic when unit is wider than 600.
Fixed Issue with drawing of cutouts when 2 cutouts on a component.
Add setting to enable or disable checking for updates.
Fixed issue with unit sizes after changing floor plan dimensions.
Fixed issue with grooves on certain units.
Add auto hide of tooltip when clicking on unit in floor plan.
Add ability to filter customer job names.
Fixed issue with display of hanger rails when shelve quantity is 0.
Add angled 3D floor plan view.
Add ability to change tax from VAT to GST. (For Australian customers)
Add single door unit with flip-up door.
Add double door unit with flip-up doors.
Add double door unit with single flip-up door at bottom of unit.
Add double door unit with single flip-up door at top of unit.
Add top microwave combination unit with drawers at bottom.
Fixed issue with door width on bottom single door with offset hinges.
Fixed issue with drawer front width on bedroom unit with drawers.
Fixed 2D and 3D views of blind corner units.
Improved 2D view of chimney when wall colors is not white.
Add new range of sinks and prep bowls.
Add option to select double hanger rails in bedroom cupboards.
Improved 2D and 3D views to display hanger rails in bedroom cupboards.
Fixed issue with plinth cutting list heights under certain conditions.
Fixed issue with calculation of unit side length under certain conditions.
Fixed issue with cross-cuts when deleting a drawer units from floor plan.
Fixed issue with cut-outs when deleting a corner units from floor plan.
Fixed issue with grooves when deleting units from floor plan.
Fixed issue with miters when deleting units from floor plan.
Improved cutting list selection in board optimizer.
Fixed issue with light shields on 2D views.
Fixed issue with top corner unit handle position on 2D views.
Improved board color selection when changing colors in floor plan.
Improved new unit selection to save system memory.
Add setting to select long or short face panels on kitchen bottom units.
Add setting to select long or short face panels on bedroom units.
Add setting to select long top cleat on kitchen bottom combination units.
Add setting to allow automatic calculation of drawer depths.
Fixed issue with calculating of Pantry/Broom Combo Unit upright width.
Fixed issue with MW Drawer Combo Unit drawer front sizes.
Fixed issue with calculating of corner unit side widths if indents bigger than 0.
Fixed issue with printing of cutting list cover page.
Fixed issue with printing of cut-outs in board optimization.
Fixed issue with calculating of edging on components with cross cuts.
Fixed issue with loading of glass to hardware selection
Fixed issue with calculation of recommended glass quantity.
Fixed issue with disabled top drawer height under certain conditions.
Fixed issue with door positions in 3D views under certain conditions.
Fixed issue with Bedroom 4 Door Unit divider quantity.
Fixed issue with “Invoice No” when printing invoices
Add ability to change quote date to the current date.
Fixed issue with unit top levels in 2D views
Fixed issue with units snapping to walls in large rooms
Fixed issue with drawer fronts on Eye-Level ovens.
Fixed issue with material selection
Fixed issue with deleting of units
Add solid drawer bottoms to 2 door drawer combo units
Add solid drawer bottoms to bedroom drawer combo units
Add ability to select Grass XP, Dynapro or Integra drawers
Fixed issue with shelve width on units with both sides visible.
Fixed issue with deleting of doors and windows from plan.
Fixed issue with material selection
Program make use of one database instead of different files for each project.
Settings to select bearing runners on all drawers..
Add capability to have rooms with L-shapes.
Click on walls to create front views.
Change top wine rack to have several uprights.
Add bottom wine rack.
Add top single and two door unit with a drawer at the bottom.
Improved snapping of units.
Exporting views in floor plan to JPEG files for emailing.
E-Mail of quotations and invoices.
Improved quotation and invoice in html format.
Comparing of prices when doing quotations and selecting of cheapest supplier.
Updating of single or same-priced items or increasing supplier prices by percentage.
Capability to do up to 4 floor plans on a single project.
Naming of different plans.
Setting to make top unit side panels longer than unit height.
Setting to change door frames to two strips with glass in the center.
Displaying of glass on front views.
Setting to allow for floor or wall units to be grooved separately.
Add 5 new colors to the front views:
Add capability to get a front view of units on floor center.
Adding, editing and displaying of cutouts, miters and grooves on board optimization.
Suggesting of hardware quantities.
Setting to make doors left or right swing.
Displaying of doors on plan views.
Setting of default printers to print cutting lists on labels or plain paper.
Setting of display and print colors for board optimization.
Vastly improved visual appearance of all features.
Ability to edit unit cutting list directly in the unit cutting list screen.
bility to add or remove cornice on cupboards.
Ability to add or remove light shields on cupboards.
Automatically add plinths and top fillers to cutting list.
Add Top unit with extractor fan below.
Add eye-level oven/Microwave combination unit.
Add ability to remove kitchen unit doors to view unit frame layout on front views.
Settings to specify default drawer depths.
Setting to change each unit to a cleated unit.
Settings to add left and right face panels to units.
Changed single door bedroom unit with drawers to split doors when unit are 600 or wider. Drawer fronts will not split.
Setting to change 2 door bottom or 2 door bedroom unit to a blind-corner unit.
Setting to make any corner unit a 45° corner unit.
Changing of top drawer front height.
Front views with real fridges, ovens and microwaves.
Adding of Dishwashers, Washing machines and Tumble dryers to floor plan.
Automatic placing of units next to existing units on floor plan.
Snapping of units to existing units when dragging them on floor plan.
Correcting bug in printing of floor plans and front views.
Setting to use melamine for backing on glass door units.
Setting for recess backing on bedroom units.
Setting to miter fixing rails on recessed backing.
New icons on main and floor screens.
Choosing profiled doors on front views eg. Colonial, Tudor, Modern, etc.
Saving of ALL configuration settings and values with project.
Calculations based on project settings instead of configuration settings.
Setting to choose pantry unit with broom cupboard combination.
Setting of currency symbol.
Setting to reduce backing size to be smaller than unit width.
New colors added to front views – Bodensee Cherry, Royal Mahogany and Venza Oak.
Extra cutting lists to add extra components. Data added to these cutting lists will not lost data when re-compiling cutting list.
Changing of bottom corner unit length and width.
Changing of Top corner unit length and width.
Cloning of units on floor plan.
Setting to include or exclude hinge holes in cutting list.
Setting to include full or half holes for bi-fold hinges in cutting list.
Unit preview with real photos of selected unit.
Setting to allow for 2 rails on top units.
Setting to allow for DK3 to be put all around doors.
Setting up of default runner length.
Changing of bottom corner unit length and width.
Printing of cutting Layout on Label paper.
Entering of all unit dimensions on Floor plan.
Correcting bug – unable to save solid door type to project.
Changed “Rekening” on invoice to “Faktuur”.
Correcting bug in cutting list – Saving and opening of cutting lists.
Add new screen to show runner position on drawer units.
Setting to allow all material of a unit to be added to grained melamine cut list – Display units with frame or glass doors.
Setting to change drawer unit to unit with cane baskets.
Setting to allow for glass doors on a unit. Doors will not be added to a cutting list.
One and two door bedroom units with drawers at bottom.
Changing of top unit depth on fridge unit.
Bottom single door unit with drawer above door.
Setting to allow sides of bottom units to go on top of unit base.
Viewing and printing of bedroom units with or without doors in floor plan.
Setting to view bedroom units with shelves on left or right side of combination bedroom units.
Better printing of cutting lists.
Calculating and printing of edging quantities on board layout.
Setting up of banking details for printing on invoices.
Microwave combination unit with roller door.
Double clicking of unit in floor plan to change unit dimensions.
Displaying visible sides in status bar on floor plan.
Setting to allow for bottom corner units with split shelves.
Setting to allow for extra rail on bottom units.
Setting to allow for 45 Degree corner units in kitchen.
Backing up and restoring of setup files and project files.
Bug fixed on fridge unit door width.
Floor plan for bedroom units.
Add option to use 2 mm Impact edging.
Setting to change display unit from shot sides to long sides.
Setting up of additional notes to be printed with quotations.
Combined setup of hardware list and fixed material prices.
No history available for previous versions….